BT-C100 NIMH Li-ion BATTERY CHARGER with POWER BANK
1. Selectable charging current from 200mA to 2000mA at user's choice for different batteries( Li-ion battery maximum charging current limited to 1600mA charging and 700mA for discharging due to heat control reason).
2. Charger can handle NiMH,Li-Ion batteries( AA, AAA, C, D , 14340 to 26650 protected or unprotected). 3.2v, 3.7v and 3.85v Li-ion battery type can further be selected by pressing "SET" button longer than 6s.
3. USB output for 5v/2.1 with auto load detection for apple devices. Digital USB output monitoring function available for USB output voltage, current or Ah. High efficency (>90%) for USB output. Automatically detects over current loading( when load current is over 2.5A) and battery voltage is low ( at 3.0v)
4. 16 bit Sigma-Delta AD converter monitors accurate minus delta voltage for precise charging termination condition.
5. temperature sensors used to monitor battery and controller board working condition to achieve high reliability. when high temperature is detected at high working current ( >1000mA), working current will be automatically reduced preventing charger from over heating.
6. Battery impedance measurement.
7. Four Working Mode Available at User's Choice: Charge, Discharge, Test,Quick Test and Refresh.
8. Easy Read LCD with back light Showing Battery Voltage, Charge/Discharge Current, Charging Time, Battery Capacity etc.
9. Automatically find out battery type and using properait charging or discharging alogrithm.
10. Operating temperature: 0 - 45 C
11. Maximum charging capacity 20.00Ah or working time is over 100hour.
12. 12V/1A or 5V/2A external power adapter for reliable charging performance.( Car power adapter cord can be packed into the same box, this quotation is not including this car power adapter cable). When 5V power attached, charger will reduce li-ion charging current maximum to 1000mA automatically.